What is a Sound Card?
Sound card
Typical uses of sound cards include providing the audio component for multimedia applications such as music composition, editing video or audio, presentation/education, and entertainment (games). Many computers have sound capabilities built in, while others require these expansion cards if audio capability is desired.
General characteristics
Close-up of a sound card PCB, showing electrolytic capacitors (most likely for AC coupling), SMT capacitors and resistors, and a YAC512 two-channel 16-bit DAC.A typical sound card includes a sound chip, usually featuring a digital-to-analog converter, that converts recorded or generated digital waveforms of sound into an analog format. This signal is led to a (typically 1/8-inch earphone-type) connector where an amplifier, headphones, or similar sound destination can be plugged in. More advanced designs usually include more than one sound chip to separate duties between digital sound production and synthesized sounds (usually for real-time generation of music and sound effects utilizing little data and CPU time).
Digital sound reproduction is usually achieved by multi-channel DACs, able to play multiple digital samples at different pitches and volumes, optionally applying real-time effects like filtering or distortion. Multi-channel digital sound playback can also be used for music synthesis if used with a digitized instrument bank of some sort, typically a small amount of ROM or Flash memory containing samples corresponding to the standard MIDI instruments. (A contrasting way to synthesize sound on a PC uses "audio codecs", which rely heavily on software for music synthesis, MIDI compliance and even multiple-channel emulation. This approach has become common as manufacturers seek to simplify the design and the cost of the sound card itself).
Most sound cards have a line in connector where the sound signal from a cassette tape recorder or similar sound source can be input. The sound card can digitize this signal and store it (controlled by the corresponding computer software) on the computer's hard disk for editing or further reproduction. Another typical external connector is the microphone connector, for connecting to a microphone or other input device that generates a relatively lower voltage than the line in connector. Input through a microphone jack is typically used by speech recognition software or Voice over IP applications.
Connections
Most sound cards since 1999 conform to Microsoft's PC 99 standard for color coding the external connectors as follows:
Color Function
Pink Analog microphone input.
Light blue Analog line level input.
Lime green Analog line level output for the main stereo signal (front speakers or headphones).
Black Analog line level output for rear speakers.
Silver Analog line level output for side speakers.
Orange S/PDIF digital output (sometimes used as an analog line output for a center speaker instead)
Voices vs channels
Another important characteristic of any sound card is the number of distinct voices (intended as the number of sounds that can be played back simultaneously and independently) and the number of channels (intended as the number of distinct electrical audio outputs).
For example, many older sound chips had three voices, but only one audio channel (mono) where all the voices were mixed into, while the AdLib sound card had 9 voice and 1 mono channel.
For a number of years, most PC sound cards had multiple FM synthesis voices (typically 9 or 18) which were mostly used for MIDI music, but only one (mono) or two(stereo) voice(s) and channel(s) dedicated to playing back digital sound samples, and playing back more than one digital sound sample required performing a software downmix at a fixed sampling rate. Modern low-cost integrated soundcards using an audio codec like the AC'97 still work that way, although they may have more than two sound output channels (surround sound).
Today, a sound card having hardware support for more than the two standard stereo voices, is likely to referred at as "providing hardware audio acceleration".
History of sound cards for the IBM PC architecture
A sound card based on VIA Envy chip
Echo Digital Audio Corporation's Indigo IO — PCMCIA card 24-bit 96 kHz stereo in/out sound cardSound cards for computers based on the IBM PC were uncommon until 1988, leaving the internal PC speaker as the only way early PC software could produce sound and music. The speaker was limited to square wave production, leading to the common nickname of "beeper" and the resulting sound described as "beeps and boops". Several companies, most notably Access Software, developed techniques for digital sound reproduction over the PC speaker; the resulting audio, while functional, suffered from distorted output and low volume, and usually required all other processing to halt while sounds were played. Other home computer models of the 1980s included hardware support for digital sound playback or music synthesis (or both), leaving the IBM PC at a disadvantage when it came to multimedia applications such as music composition or gaming.
It is important to note that the initial design and marketing focuses of sound cards for the IBM PC platform were not based on gaming, but rather on specific audio applications such as music composition (AdLib Personal Music System, Creative Music System, IBM Music Feature Card) or on speech synthesis (Digispeech DS201, Covox Speech Thing, Street Electronics Echo). It took the involvement of Sierra and other game companies in 1988 to switch the focus toward gaming.
Hardware manufacturers
One of the first manufacturers of sound cards for the IBM PC was AdLib, who produced a card based on the Yamaha YM3812 sound chip, aka the OPL2. The AdLib had two modes: A 9-voice mode where each voice could be fully programmed, and a lesser-used "percussion" mode that used 3 regular voices to produce 5 independent percussion-only voices for a total of 11. (The percussion mode was considered inflexible by most developers, so it was used mostly by AdLib's own composition software.)
Creative Labs also marketed a sound card at the same time called the Creative Music System. Although the C/MS had twelve voices to AdLib's nine, and was a stereo card while the AdLib was mono, the basic technology behind it was based on the Philips SAA 1099 which was essentially a square-wave generator. Sounding not unlike twelve simultaneous PC speakers, it never caught on the way the AdLib did, even after Creative marketed it a year later through Radio Shack as the Game Blaster. The Game Blaster retailed for under $100 and included the hit game title Silpheed.
Probably the most significant historical change in the history of sound cards came when Creative Labs produced the Sound Blaster card. The Sound Blaster cloned the AdLib, and also added a sound coprocessor to record and play back digital audio (presumably an Intel microcontroller, which Creative incorrectly called a "DSP" to suggest it was a digital signal processor), a game port for adding a joystick, and the ability to interface to MIDI equipment (using the game port and a special cable). With more features at nearly the same price point, and compatibility with existing AdLib titles, most first-time buyers chose the Sound Blaster. The Sound Blaster eventually outsold the AdLib and set the stage for dominating the market.
The Sound Blaster line of cards, in tandem with the first cheap CD-ROM drives and evolving video technology, ushered in a new era of multimedia computer applications that could play back CD audio, add recorded dialogue to computer games, or even reproduce motion video (albeit at much lower resolutions and quality). The widespread adoption of Sound Blaster support in multimedia and entertainment titles meant that future sound cards such as Media Vision's Pro Audio Spectrum and the Gravis Ultrasound needed to address Sound Blaster compatibility if they were to compete against it.
Industry adoption
When game company Sierra On-Line opted to support add-on music hardware (instead of built-in hardware such as the PC speaker and built-in sound capabilities of the IBM PCjr and Tandy 1000), the concept of what sound and music could be on the IBM PC changed dramatically. Two of the companies Sierra partnered with were Roland and Adlib, opting to produce in-game music for King's Quest 4 that supported the Roland MT-32 and Adlib Music Synthesizer. The MT-32 had superior output quality, due in part to its method of sound synthesis as well as built-in reverb. Being the most sophisticated synthesizer they supported, Sierra chose to use most of the MT-32's custom features and unconventional instrument patches to produce background sound effects (birds chirping, horses clopping, etc.) before the Sound Blaster brought playing real audio clips to the PC entertainment world. Many game companies would write for the MT-32, but support the Adlib as an alternative due to the latter's higher market base. The adoption of the MT-32 led the way for the creation of the MPU-401/Roland Sound Canvas and General MIDI standards as the most common means of playing in-game music until the mid-1990s.
Feature evolution
Most ISA bus soundcards could not record and play digitized sound simultaneously, mostly due to inferior card DSPs. Later PCI bus cards fixed these limitations and are mostly full-duplex.
For years, soundcards had only one or two channels of digital sound (most notably the Sound Blaster series and their compatibles) with the notable exception of the Gravis Ultrasound family, which had hardware support for up to 32 independent channels of digital audio. Early games and MOD-players needing more channels than the card could support had to resort to mixing multiple channels in software. Today, most good quality sound cards have hardware support for at least 16 channels of digital audio, but others, like those that utilize cheap audio codecs, still rely partially or completely on software to mix channels, through either device drivers or the operating system itself to perform a software downmix of multiple audio channels.
Sound devices other than expansion cards
Integrated sound on the PC
In 1984, the IBM PCjr debuted with a rudimentary 3-voice sound synthesis chip, the SN76489, capable of generating three square-wave tones with variable amplitude, and a pseudo white noise channel that could generate primitive percussion sounds. The Tandy 1000, initially being a clone of the PCjr, duplicated this functionality, with the Tandy TL/SL/RL line adding digital sound recording/playback capabilities.
In the late 1990s, many computer manufacturers began to replace plug-in soundcards with a "codec" (actually a combined audio AD/DA-converter) integrated into the motherboard. Many of these used Intel's AC97 specification. Others used cheap ACR slots.
As of 2005, these "codecs" usually lack the hardware for direct music synthesis or even multi-channel sound, with special drivers and software making up for these lacks, at the expense of CPU speed (for example, MIDI reproduction takes away 10-15% CPU time on an Athlon XP 1600+ CPU).
Nevertheless, some manufacturers offered (and offer, as of 2006) motherboards with integrated "real" (non-codec) soundcards usually in the form of a custom chipset providing e.g. full ISA or PCI Soundblaster compatibility, thus saving an expansion slot while providing the user with a (relatively) high quality soundcard.
Integrated sound on other platforms
Various computers which do not use the IBM PC architecture, such as Apple's Macintosh, and workstations from manufacturers like Sun have had their own motherboard integrated sound devices. In some cases these provide very advanced capabilities (for the time of manufacture), in most they are minimal systems. Some of these platforms have also had sound cards designed for their bus architectures which of course cannot be used in a standard PC.
USB sound cards
While not literally sound cards (since they don't plug into slots inside of a computer, and usually are not card-shaped (rectangular)), there are devices called USB sound cards. These attach to a computer via USB cables. The USB specification defines a standard interface, the USB audio device class, allowing a single driver to work with the various USB sound devices on the market.
Other outboard sound devices
USB Sound Cards are far from the first external devices allowing a computer to record or synthesize sound. Virtually any method that was once common for getting an electrical signal in or out of a computer has probably been used to attempt to produce sound.
Driver architecture
To use a sound card, the operating system typically requires a specific device driver. Some operating systems include the drivers for some or all cards available, in other cases the drivers are supplied with the card itself, or are available for download.
DOS programs for the IBM PC often had to use universal middleware driver libraries (such as the HMI Sound Operating System, the Miles Sound System etc.) which had drivers for most common sound cards, since DOS itself had no real concept of a sound card. Some card manufacturers provided (sometimes inefficient) middleware TSR-based drivers for their products, and some programs simply had drivers incorporated into the program itself for the sound cards that were supported.
Microsoft Windows uses proprietary drivers generally written by the sound card manufacturers. Many makers supply the drivers to Microsoft for inclusion on Windows distributions. Sometimes drivers are also supplied by the individual vendors for download and installation. Bug fixes and other improvements are likely to be available faster via downloading, since Windows CDs cannot be updated as frequently as a web or FTP site. Vista will use UAA.
A number of versions of UNIX make use of the portable Open Sound System. Drivers are seldom produced by the card manufacturer.
Most Linux-based distributions make use of the Advanced Linux Sound Architecture, but have taken measures to remain compatible with the Open Sound System.
General characteristics
Close-up of a sound card PCB, showing electrolytic capacitors (most likely for AC coupling), SMT capacitors and resistors, and a YAC512 two-channel 16-bit DAC.A typical sound card includes a sound chip, usually featuring a digital-to-analog converter, that converts recorded or generated digital waveforms of sound into an analog format. This signal is led to a (typically 1/8-inch earphone-type) connector where an amplifier, headphones, or similar sound destination can be plugged in. More advanced designs usually include more than one sound chip to separate duties between digital sound production and synthesized sounds (usually for real-time generation of music and sound effects utilizing little data and CPU time).
Digital sound reproduction is usually achieved by multi-channel DACs, able to play multiple digital samples at different pitches and volumes, optionally applying real-time effects like filtering or distortion. Multi-channel digital sound playback can also be used for music synthesis if used with a digitized instrument bank of some sort, typically a small amount of ROM or Flash memory containing samples corresponding to the standard MIDI instruments. (A contrasting way to synthesize sound on a PC uses "audio codecs", which rely heavily on software for music synthesis, MIDI compliance and even multiple-channel emulation. This approach has become common as manufacturers seek to simplify the design and the cost of the sound card itself).
Most sound cards have a line in connector where the sound signal from a cassette tape recorder or similar sound source can be input. The sound card can digitize this signal and store it (controlled by the corresponding computer software) on the computer's hard disk for editing or further reproduction. Another typical external connector is the microphone connector, for connecting to a microphone or other input device that generates a relatively lower voltage than the line in connector. Input through a microphone jack is typically used by speech recognition software or Voice over IP applications.
Connections
Most sound cards since 1999 conform to Microsoft's PC 99 standard for color coding the external connectors as follows:
Color Function
Pink Analog microphone input.
Light blue Analog line level input.
Lime green Analog line level output for the main stereo signal (front speakers or headphones).
Black Analog line level output for rear speakers.
Silver Analog line level output for side speakers.
Orange S/PDIF digital output (sometimes used as an analog line output for a center speaker instead)
Voices vs channels
Another important characteristic of any sound card is the number of distinct voices (intended as the number of sounds that can be played back simultaneously and independently) and the number of channels (intended as the number of distinct electrical audio outputs).
For example, many older sound chips had three voices, but only one audio channel (mono) where all the voices were mixed into, while the AdLib sound card had 9 voice and 1 mono channel.
For a number of years, most PC sound cards had multiple FM synthesis voices (typically 9 or 18) which were mostly used for MIDI music, but only one (mono) or two(stereo) voice(s) and channel(s) dedicated to playing back digital sound samples, and playing back more than one digital sound sample required performing a software downmix at a fixed sampling rate. Modern low-cost integrated soundcards using an audio codec like the AC'97 still work that way, although they may have more than two sound output channels (surround sound).
Today, a sound card having hardware support for more than the two standard stereo voices, is likely to referred at as "providing hardware audio acceleration".
History of sound cards for the IBM PC architecture
A sound card based on VIA Envy chip
Echo Digital Audio Corporation's Indigo IO — PCMCIA card 24-bit 96 kHz stereo in/out sound cardSound cards for computers based on the IBM PC were uncommon until 1988, leaving the internal PC speaker as the only way early PC software could produce sound and music. The speaker was limited to square wave production, leading to the common nickname of "beeper" and the resulting sound described as "beeps and boops". Several companies, most notably Access Software, developed techniques for digital sound reproduction over the PC speaker; the resulting audio, while functional, suffered from distorted output and low volume, and usually required all other processing to halt while sounds were played. Other home computer models of the 1980s included hardware support for digital sound playback or music synthesis (or both), leaving the IBM PC at a disadvantage when it came to multimedia applications such as music composition or gaming.
It is important to note that the initial design and marketing focuses of sound cards for the IBM PC platform were not based on gaming, but rather on specific audio applications such as music composition (AdLib Personal Music System, Creative Music System, IBM Music Feature Card) or on speech synthesis (Digispeech DS201, Covox Speech Thing, Street Electronics Echo). It took the involvement of Sierra and other game companies in 1988 to switch the focus toward gaming.
Hardware manufacturers
One of the first manufacturers of sound cards for the IBM PC was AdLib, who produced a card based on the Yamaha YM3812 sound chip, aka the OPL2. The AdLib had two modes: A 9-voice mode where each voice could be fully programmed, and a lesser-used "percussion" mode that used 3 regular voices to produce 5 independent percussion-only voices for a total of 11. (The percussion mode was considered inflexible by most developers, so it was used mostly by AdLib's own composition software.)
Creative Labs also marketed a sound card at the same time called the Creative Music System. Although the C/MS had twelve voices to AdLib's nine, and was a stereo card while the AdLib was mono, the basic technology behind it was based on the Philips SAA 1099 which was essentially a square-wave generator. Sounding not unlike twelve simultaneous PC speakers, it never caught on the way the AdLib did, even after Creative marketed it a year later through Radio Shack as the Game Blaster. The Game Blaster retailed for under $100 and included the hit game title Silpheed.
Probably the most significant historical change in the history of sound cards came when Creative Labs produced the Sound Blaster card. The Sound Blaster cloned the AdLib, and also added a sound coprocessor to record and play back digital audio (presumably an Intel microcontroller, which Creative incorrectly called a "DSP" to suggest it was a digital signal processor), a game port for adding a joystick, and the ability to interface to MIDI equipment (using the game port and a special cable). With more features at nearly the same price point, and compatibility with existing AdLib titles, most first-time buyers chose the Sound Blaster. The Sound Blaster eventually outsold the AdLib and set the stage for dominating the market.
The Sound Blaster line of cards, in tandem with the first cheap CD-ROM drives and evolving video technology, ushered in a new era of multimedia computer applications that could play back CD audio, add recorded dialogue to computer games, or even reproduce motion video (albeit at much lower resolutions and quality). The widespread adoption of Sound Blaster support in multimedia and entertainment titles meant that future sound cards such as Media Vision's Pro Audio Spectrum and the Gravis Ultrasound needed to address Sound Blaster compatibility if they were to compete against it.
Industry adoption
When game company Sierra On-Line opted to support add-on music hardware (instead of built-in hardware such as the PC speaker and built-in sound capabilities of the IBM PCjr and Tandy 1000), the concept of what sound and music could be on the IBM PC changed dramatically. Two of the companies Sierra partnered with were Roland and Adlib, opting to produce in-game music for King's Quest 4 that supported the Roland MT-32 and Adlib Music Synthesizer. The MT-32 had superior output quality, due in part to its method of sound synthesis as well as built-in reverb. Being the most sophisticated synthesizer they supported, Sierra chose to use most of the MT-32's custom features and unconventional instrument patches to produce background sound effects (birds chirping, horses clopping, etc.) before the Sound Blaster brought playing real audio clips to the PC entertainment world. Many game companies would write for the MT-32, but support the Adlib as an alternative due to the latter's higher market base. The adoption of the MT-32 led the way for the creation of the MPU-401/Roland Sound Canvas and General MIDI standards as the most common means of playing in-game music until the mid-1990s.
Feature evolution
Most ISA bus soundcards could not record and play digitized sound simultaneously, mostly due to inferior card DSPs. Later PCI bus cards fixed these limitations and are mostly full-duplex.
For years, soundcards had only one or two channels of digital sound (most notably the Sound Blaster series and their compatibles) with the notable exception of the Gravis Ultrasound family, which had hardware support for up to 32 independent channels of digital audio. Early games and MOD-players needing more channels than the card could support had to resort to mixing multiple channels in software. Today, most good quality sound cards have hardware support for at least 16 channels of digital audio, but others, like those that utilize cheap audio codecs, still rely partially or completely on software to mix channels, through either device drivers or the operating system itself to perform a software downmix of multiple audio channels.
Sound devices other than expansion cards
Integrated sound on the PC
In 1984, the IBM PCjr debuted with a rudimentary 3-voice sound synthesis chip, the SN76489, capable of generating three square-wave tones with variable amplitude, and a pseudo white noise channel that could generate primitive percussion sounds. The Tandy 1000, initially being a clone of the PCjr, duplicated this functionality, with the Tandy TL/SL/RL line adding digital sound recording/playback capabilities.
In the late 1990s, many computer manufacturers began to replace plug-in soundcards with a "codec" (actually a combined audio AD/DA-converter) integrated into the motherboard. Many of these used Intel's AC97 specification. Others used cheap ACR slots.
As of 2005, these "codecs" usually lack the hardware for direct music synthesis or even multi-channel sound, with special drivers and software making up for these lacks, at the expense of CPU speed (for example, MIDI reproduction takes away 10-15% CPU time on an Athlon XP 1600+ CPU).
Nevertheless, some manufacturers offered (and offer, as of 2006) motherboards with integrated "real" (non-codec) soundcards usually in the form of a custom chipset providing e.g. full ISA or PCI Soundblaster compatibility, thus saving an expansion slot while providing the user with a (relatively) high quality soundcard.
Integrated sound on other platforms
Various computers which do not use the IBM PC architecture, such as Apple's Macintosh, and workstations from manufacturers like Sun have had their own motherboard integrated sound devices. In some cases these provide very advanced capabilities (for the time of manufacture), in most they are minimal systems. Some of these platforms have also had sound cards designed for their bus architectures which of course cannot be used in a standard PC.
USB sound cards
While not literally sound cards (since they don't plug into slots inside of a computer, and usually are not card-shaped (rectangular)), there are devices called USB sound cards. These attach to a computer via USB cables. The USB specification defines a standard interface, the USB audio device class, allowing a single driver to work with the various USB sound devices on the market.
Other outboard sound devices
USB Sound Cards are far from the first external devices allowing a computer to record or synthesize sound. Virtually any method that was once common for getting an electrical signal in or out of a computer has probably been used to attempt to produce sound.
Driver architecture
To use a sound card, the operating system typically requires a specific device driver. Some operating systems include the drivers for some or all cards available, in other cases the drivers are supplied with the card itself, or are available for download.
DOS programs for the IBM PC often had to use universal middleware driver libraries (such as the HMI Sound Operating System, the Miles Sound System etc.) which had drivers for most common sound cards, since DOS itself had no real concept of a sound card. Some card manufacturers provided (sometimes inefficient) middleware TSR-based drivers for their products, and some programs simply had drivers incorporated into the program itself for the sound cards that were supported.
Microsoft Windows uses proprietary drivers generally written by the sound card manufacturers. Many makers supply the drivers to Microsoft for inclusion on Windows distributions. Sometimes drivers are also supplied by the individual vendors for download and installation. Bug fixes and other improvements are likely to be available faster via downloading, since Windows CDs cannot be updated as frequently as a web or FTP site. Vista will use UAA.
A number of versions of UNIX make use of the portable Open Sound System. Drivers are seldom produced by the card manufacturer.
Most Linux-based distributions make use of the Advanced Linux Sound Architecture, but have taken measures to remain compatible with the Open Sound System.
0 comments:
Post a Comment